Technical data sheet THERMIX® APM FOIL

PRODUCT DESCRIPTION:

THERMIX APM FOIL® is a gel-based liquid protective film that, upon drying, forms a dense polymer coating. This easily removable and tearable film serves as a temporary protective layer, safeguarding surfaces from minor damage, scratches, and dirt. It is an ideal solution for construction or renovation projects, offering protection against dust, paint, cement, and mechanical damage such as welding spatters, metal chips, and scratches. By using this liquid film, construction processes can be simplified, accelerated, and, most importantly, the associated costs of preparatory work can be significantly reduced.


APM FOIL® is a liquid foil that can be applied using a roller, brush, or spray gun. This water-based solution is non-toxic and 100% biodegradable, ensuring environmental safety. It provides surface protection for up to 12 months and even longer, depending on the application location and conditions. APM FOIL® forms a strong transparent or opaque film, depending on the application type and color, effectively adhering to the substrate. The film can be easily removed without leaving any traces, leaving the surface perfectly clean and eliminating the need for washing and post-construction cleaning expenses. Suitable for both colored and undyed surfaces, APM FOIL® serves as a water-based emulsion coating for temporary protection on both vertical and horizontal surfaces.


APM FOIL® is a temporary peel-off protective coating specifically designed to safeguard non-porous surfaces from various types of damage such as abrasion, stains, spills, moisture, scratches, and corrosion. This liquid coating dries to create a robust and flexible film that effectively shields surfaces. It is recommended for internal use and can be used outdoors during the summer, provided heavy rainfall is avoided. For optimal results, application should be carried out at a temperature not lower than 10°C and humidity not exceeding 85%.

ADVANTAGES 

  • Easy to apply;
  • The film has cleaning properties, which means that after removal, the protected surface does not require washing or cleaning;
  • When applied to dirty (dusty) surfaces, the film "absorbs" everything under it, and after removing it, the surfaces become perfectly clean;
  • Protects surfaces against scratches, dirt and is durable;
  • It reduces the costs of construction works by reducing the costs of post-construction cleaning and surface cleaning;
  • Reduction of the risk of losses and costly repairs;
  • Application speed compared to standard foils (no tedious wrapping with tapes and foils);
  • Improvement of the company's image (no complaints);
  • Safety (the product does not react with glass and gaskets);
  • A water-based product, safe for the environment, 100% ecological and biodegradable;
  • Fast-setting and efficient to use;
  • Chemically resistant - resistance to solvents and petroleum products;
  • Abrasion, scratch and UV resistant;
  • Protects against sawdust, water, moisture and corrosion;
  • Applying to horizontal and vertical surfaces;
  • non-flammable;
  • Tools can be cleaned with water after application, making cleaning easy and cheap;
  • Easy peel off protective coating;


SUITABILITY

Glass facades, facade panels, windows, shop windows, doors, elevators, walls, handrails, furniture, bathroom and kitchen fittings, machine elements, polished concrete, tiles and terracotta, new cars, buses, protection of machine parts during storage or transport, cranes, protection of coated metals during production or maintenance, pipes during transport or storage, protection of spray booths. Apartment renovations: painting and plastering works, finishing works, tiling. Temporary protection for ceramic and marble surfaces. Surface protection against damage, construction and repair of yachts, protection of decorations, advertisements during fairs, transport packaging, advertising in transport. Protection against dirt, dust, oil, grease, rust, corrosion.

Specification

The physical state

Colour

 Smell

Boiling point, initial boiling point and boiling range

Flash point

Decomposition temperature 

pH

Kinematic viscosity 

Density or relative density

Liquid

Clear, colourless

Odourless

approx. 100°C.

Not applicable

Not applicable

5-7

20000-30000 mPa*s (dynamic,Brookfield RVF 6/20 23°C)

1.09 g/cm3

Product Information

CAN BE APPLIED TO:

Plastics, acrylic, PVC, ceramics, parquet, panels, marble, granite, work surfaces, stainless steel, aluminum, polished concrete, varnished floors, tiles, laminated surfaces, glass and most non-porous surfaces.

DRYING TIME:

At approximately 150 microns, the coating will be fully dry in approximately
60 minutes at room temperature. Forced drying and increasing the surface temperature to a maximum of 40°C can be used. Full curing depends on the ambient temperature, humidity, ventilation and thickness of the applied layer and takes from 0.5 to 24 hours maximum.

TYPE OF MATERIAL: 

Water-based, non-toxic, non-flammable (wet and dry).

COLOR: 

Colourless/transparent in wet and dry form. Also available
in different colours on request. Non-standard base colours are subject to price negotiations.

REMOVAL:

The wet layer can be easily removed manually.

CLEANING: 

 Clean rollers, guns and other equipment with water immediately after use.

PACKAGING: 

Plastic buckets with a capacity of 20 L

APPLICATION INFORMATION AND RECOMMENDATIONS

To ensure proper application, please consult the provided application manual for detailed instructions. It is recommended to use a wet film gauge to ensure that the minimum wet film thickness is achieved. Thoroughly mix the contents of the container before use. Before applying the coating, always conduct a test area and peel off a sample surface of each substrate to ensure compatibility.

The minimum wet film thickness (WFT) should be 150 microns, which corresponds to a dry film thickness (DFT) of 50 microns. The maximum wet film thickness should not exceed 300 microns. Avoid application in wet or frosty conditions and protect the coated surface from rainfall until completely dry. Additionally, avoid any precipitation within 24 hours of application. It is recommended to maintain a material temperature of 20-30°C during the application process.

Roller Application

  • Using a lambswool roller - apply 2 layers, allowing the first to dry completely. Apply generously to achieve a minimum WFT of 150 microns (WFT) (50 microns DFT);
  • For roller application, up to 10% of the total weight of water may be added; two layers can be applied after complete drying of each layer in turn;
  • Material temperature during application should be 20-30°C;
  • Work should be carried out at a temperature not lower than 10°C and humidity not higher than 85%;
  • The roller should be dry and long-haired, preferably made of sheep's wool;
  • The surface should be clean, degreased, without impurities;
  • Apply one layer, waiting for the layer to dry completely;
  • Then apply a second coat;
  • At the end of the work, the roller should be cleaned with water and the clean tools should be allowed to dry.

Spray application:

  • Preparation for application: spray painting tools should be thoroughly rinsed with clean water. They must be completely clean of solvents or thinners;
  • The surface to be applied should be clean of dirt, degreased;
  • In the case of application on windows, doors, gates, places with key locks should be covered with adhesive tape so as not to paint over these elements;
  • Apply with a spray gun to achieve a minimum WFT of 150 microns (50 microns DFT). Apply with an airless spray gun using a 517 / 0.017” tip;
  • When applying with an air spray gun, the mass should be diluted with water
    in the proportion of 30% - 40% of the total mass of the material, and applied in two layers
    with an interval of 2-3 hours. Airless spray - dilute the material with water in the proportion of 10-15% of the total weight of the material;
  • The application should be done in two layers, one vertical, the other horizontal. 
  • When spraying, there is no need to wait for the first layer to dry. 
  • A film applied by spraying will be more uniform.

Recommended equipment:

  • CORDLESS ULTRA HAND SPRAYER
  • GRACO ULTA

Average usage:

  • 8-10 m2/LITER

PERSONAL PROTECTION / HEALTH & SAFETY

During application, it is recommended to use a protective mask, protective gloves (prevention of e.g. an allergic reaction), protective glasses (in particular when applying with a pressure gun), painting suit to avoid stains on shoes and clothes, hearing protection, headphones when using a compressor during spray painting.

PRECAUTIONS: 

Observe the recommendations given in the safety data sheet. This data sheet does not contain information on the safety of the product. Before using the product, read the safety data sheet and the labels on the packaging in order to obtain information about the safe use and health and physical hazards. Dispose of in accordance with applicable legislation. Keep out of the reach of children. Notes for the client: The above information is accurate and to the best of our knowledge, based on reliable research and practical experience.

The specified properties are provided for guidance only and do not constitute guaranteed product properties. The customer should test the product for specific applications to be sure that it has the expected properties and provides the required operational performance.

Share by: